Materials

Parvus3D provides a range of photopolymer resins tailored to suit your printing requirements. We work closely with you to offer advice and assistance in choosing the ideal material for your industry or project.

Filter items with Type

Electrical Property

General Property

Mechanical Property

Thermal Property

Type	Properties	Units	HTL	TOUGH	HT-200	MED	Test Method
Mechanical Property	Tensile Strength	[MPa]	71.5	82.9	87.8	57.6	ASTM D638
Mechanical Property	Elastic Modulus	[MPa]	2397	2566	3074	1706	ASTM D638
Mechanical Property	Elongation At Break	[%]	7.8	14	4.6	13	ASTM D638
Mechanical Property	Elongation At Yield	[%]					-
Mechanical Property	Flexural Strength	[MPa]	112.9	122.4	153.6	96.6	ASTM D790
Mechanical Property	Flexural Modulus	[GPa]	2.8	4	3.8	2.5	ASTM D790
Mechanical Property	Impact Strength	[J/m]	30		14.5		ASTM D256
Mechanical Property	Hardness (Shore D)	[unitless]	81	75	79	72	ASTM D785
Mechanical Property	Viscosity	[cP]	85	180	285	1100	-
Thermal Property	CTE @ 60°C	[µm/m/°C]	169	118	102	166	-
Thermal Property	HDT @ 0.45 MPa	[°C]	114.2	78	217.8	82.3	ASTM D648-07
Thermal Property	Tg (Glass Transition Temperature)	[°C]	172				ASTM D7028
Electrical Property	Dielectric Constant @10GHz	[unitless]	3.45	2.88		2.74	-
Electrical Property	DF (Dissipation Factor)	[unitless]	0.0245	0.033		0.0516	-
Electrical Property	Surface Resistance	[Ωx10⁶]					ASTM ESD S11.11
Electrical Property	Volume Resistivity	[Ω x cm x 10⁶]					ASTM D257
General Property	Contact Angle	[°]	53	40	45	53	ASTM D7334
General Property	Water Absorption @24Hrs	[%]	1.05	1.28	2.7	0.01	ASTM D570
General Property	Culture Survival Rate Invitro	[%]				95.6	-
General Property	Minimum XY Resolution	[µm]	2	2	2	2	-
General Property	Minimum Z Resolution	[µm]	5	5	5	5	-

Dive Deeper